Ethereum: BFGminer fails to find NanoFury on Windows system
As an avid Ethereum miner, I recently purchased a Nanofury ASIC unit with high hopes of maximizing my mining profits. After some trial and error, I found myself stuck trying to get the machine to recognize my NanoFury ASIC unit in the Bitcoin Fog (BFGminer) software. In this article, I will explain my experience and provide some troubleshooting tips to help you overcome similar issues.
The Setup
I set up my system with a fresh install of Ubuntu 20.04 on my Windows 10 PC. I installed BFGminer from the official GitHub repository, followed by the NanoFury firmware for my ASIC unit. I also made sure that the necessary drivers were installed and configured correctly.
Initial Issues
After running BFGminer on my system with the NanoFury ASIC unit connected, I encountered several issues:
- No Output: Although the software recognized the hardware, there was no indication of mining activity.
- Mining Speed Not Increasing: The hash rate (in H/s) remained the same as when using a different mining rig.
Troubleshooting Steps
To get my NanoFury ASIC unit up and running with BFGminer, I followed these steps:
- Update Drivers: Make sure to update the GPU drivers for your NVIDIA graphics card, which is paired with the NanoFury ASIC unit.
- Reboot the System: A simple reboot can often resolve issues related to driver conflicts or incorrect settings in BFGminer.
- Check BFGminer Configuration Files: Review the
bfgminer.conffile and make sure that the hardware detection options are configured correctly.
Additional Tips
If you are experiencing similar issues, here are some additional tips:
- Check Firmware Version: Make sure that your NanoFury ASIC unit’s firmware is up to date by visiting the manufacturer’s website.
- Check System Compatibility: Make sure that your system meets the minimum requirements for both the BFGminer and NanoFury ASIC units.
- Disable Any Antivirus Software: Temporarily disable any antivirus software to rule out conflicts.
Conclusion
While my experience has not been without its challenges, I am confident that with patience and persistence, you will be able to get your Nanofury ASIC unit recognized by BFGminer on your Windows system. If you are experiencing persistent issues or have any further questions, feel free to ask in the comments below!
I hope this article has been helpful to other miners who may be experiencing similar issues. Remember to stay up to date with the latest developments and firmware updates to ensure optimal performance. Happy mining!